產品中心

PRODUCTS CENTER

Astrodyne電源

查看更多

產品中心您現(xiàn)在的位置：首頁 > 產品展示 > > Astrodyne電源 > SPU31-102,SPU31-103,SPU31-104,SPU31-105,30W 桌面電源適配器

SPU31-102,SPU31-103,SPU31-104,SPU31-105,30W 桌面電源適配器

更新時間：2023-04-22

簡要描述：

Wide Input Voltage 90 to 264VAC, 47~63Hz
IEC-320-C14 Input Inlet
Single Output
Output Voltage Available from 5Volts(DC) - 48Volts(DC)
Splash proof

發(fā)郵件給我們：sales1@haonpower.com

西安浩南電子科技有限公司

：
: 2511137526
：tian@haonpower.com
地址：C座30619室
：710075
：www.haonpower.com

SPU31 31 Watt Switch Mode External Power Supplies

30W Desktop Switching Power Supplies for I.T.E

	Wide Input Voltage 90 to 264VAC, 47~63Hz
	IEC-320-C14 Input Inlet
	Single Output
	Output Voltage Available from 5Volts（DC） - 48Volts（DC）
	Splash proof
	Class I
Model Number		Output Voltage	Output Amps	Total Regulation
SPU31-102		5vdc	5.00 Amps	5%
SPU31-103		6vdc	4.16 Amps	5%
SPU31-104		10vdc	3.0 Amps	5%
SPU31-105		12vdc	2.5 Amps	5%
SPU31-106		15vdc	2.0 Amps	5%
SPU31-107		18vdc	1.66 Amps	5%
SPU31-108		24vdc	1.25 Amps	3%
SPU31-109		30vdc	1.0 Amps	3%
SPU31-110		36vdc	0.83 Amps	3%
SPU31-111		48vdc	0.62 Amps	3%

SPU31 series

Input Specifications

Input Voltage Range	90-264 VAC
Frequency Range	47-63 Hz
Inrush Current	Low Line: 15Amps max. High Line 30Amps max. （cold start）
Input Current	Low Line 0.8Amps @ 115VAC/High Line: 0.5Amps @ 230VAC
Leakage Current	0.75mAmps max @ 240VAC/0.5mAmps typ. @ 240VAC

General Specifications

Isolation	4242vdc Input-Output
Isolation Input-Ground	2121Volts（DC） Input-Ground
Insulation Resistance	50 MΩ min. /500Volts（DC）
Efficiency	81% @ FL, typ

Physical Specifications

Size （mm）	107x47x29.6 mm
Size （Inches）	4.21”x1.85”x1.17”
Weight （g）	265~280g
Weight （oz）	9.35~8.87oz

Output Specifications

Output Voltage	5vdc
Output Amps	5.00 Amps
Load Regulation	± 7% max.@ 230VAC
Line Regulation	± 1%, max.
Total Regulation	5%
Temperature Coefficient	±0.04%/°C, typ
Ripple and Noise	1% Pk-Pk,max @ 90VAC
Over Current Protection	110-15
Transient Response	4mS @ 100VAC @ FL to 1/2 load
Start Up, Rise Time	2S @ 100VAC max
Hold Up Time	12 mS min.@ 110VAC

Environmental Specifications

Operating Temperature	0 to +70°C @ FL （See Derate Curve）
Storage Temperature	-40 to +85°C
Working Humidity	5% to 95%, non-cond
EMI	CISPR-22B @ 220VAC FCC PART-15B @ 110VAC
MTBF	0.1 MHrs MIL-HDBK-217F（25°C）

Notes

All specifications are typical at nominal input, full load, and 25°C unless otherwise noted

Astrodyne products are not authorized or warranteed for use as critical components in life support systems, equipment used in hazardous environments, nuclear controls systems, or other mission-critical applications